Shop
09'-UP RAM Storage Bin (Single PSI) Air System (SQ3464880)
09'-UP RAM Storage Bin (Single PSI) Air System (SQ3464880)
Designed to fit 09’-UP RAM 1500, 2500 and 3500 Crew Cab trucks with in floor storage bins. Will fit several other cab configurations and manufacturers. Please contact us for additional information.
Wireless key fob (2 included) control for air up/down. A 9% duty cycle, 10 amp Viair 95C compressor (MAX 120 PSI,1.03 CFM) meant to fill both air springs to one pressure. Plug and play wire harness included. Adjustable exhaust muffler to increase/decrease the air dump speed.
Standard kit ships with hand operated digital pressure gauge to check at schrader valve. Optional Bluetooth & wired gauges are available. A small transmitter/sending unit is attached to schrader valve on the air manifold. Bluetooth sending units can receive readings anywhere in or around the truck on Android or Apple phones.
After installation, we recommend taking an (empty/no load) measurement at the wheel well lip. Apply load, then air springs back to that measurement. Take a reading with gauge, we call this the (Benchmark PSI). In most cases, this will be perfect PSI for comfortable travel, transfer weight to front axle and keep headlights aimed properly.
Unlike competitors, all components are easily serviced and replaceable if a failure occurs. Wago connectors are used for connections and are easily accessed in the enclosure.
Drilling a 7/8” hole is required to allow weather tight fitting, electrical and air line into bin.
All components carry one year warranty from date of purchase.
Dual (Bluetooth) PSI Sending Units for Android or Apple. Sensors screw onto a Schrader valve sending PSI and temperature readings to your phone.
Dual pressure reading (Blue) digital gauge for any of our small interior mounted single or dual PSI air systems. Designed to fit most any cup holder and be easily moved, connected or disconnected. Gauge has a lighted switch to turn display on or off. CAT6 cables connect the gauge to the air system and plugs attached to the sending unit(s) on the air manifold.
If the unit is purchased with an air system, it will be wired and ready to plug in. If ordered after installing an air system, connections to power and ground need to be made in the wiring junction box of your particular air system. Sending unit(s) will need to replace Schrader valve(s) on the air manifold.